How to Assemble Your AirTag Holder

What’s in the kit

  • Waterproof enclosure (two-piece)

  • Collar clip (4 sizes to fit most collars)

  • Stainless steel screws

  • Mini screwdriver
    AirTag not included.

AirTag Holder + Collar + ID ID

Before you start

  • Pick the collar clip size that best matches your pet’s collar size.

  • Lay everything out on a flat surface.

Assemble & attach

  1. Open the enclosure. Separate the two halves.

  2. Insert the AirTag. Place it inside the base.

  3. Close the enclosure. Press/twist until fully seated and sealed all the way around.

  4. Fit the clip to the collar. Slide the chosen collar clip over the collar at your preferred spot (usually near the buckle for easy access).

  5. Align the enclosure. Hold the enclosure against the outside of the collar, line up the screw holes with the clip.

  6. Secure with screws. Using the included screwdriver, insert both stainless screws and tighten until snug. Don’t overtighten—just firm enough that it doesn’t wiggle.

  7. Final check. Tug gently to confirm it’s solid, then ping the AirTag in the Find My app to ensure everything works.

Tips

  • Recheck screw tightness after the first walk and periodically thereafter.

  • Rinse the enclosure after muddy or salty adventures.

  • Keep small screws away from pets and children during assembly.